Courses & Programs

Academic Courses

Showing: Applied Engineering Technologies  Show All

• Advanced Automotive Electricity AUT-163
  Applied Engineering Technologies Credit Hours: 3

  This course covers electronic theory, wiring diagrams, test equipment, and diagnosis, repair, and replacement of electronics, lighting, gauges, horn,…

  This course covers electronic theory, wiring diagrams, test equipment, and diagnosis, repair, and replacement of electronics, lighting, gauges, horn, wiper, accessories, and body modules. Topics include networking and module communication, circuit construction, wiring diagrams, circuit testing, and troubleshooting. Upon completion, students should be able to properly use wiring diagrams, diagnose, test, and repair wiring, lighting, gauges, accessories, modules, and electronic concerns.

  View Details
• Advanced CNC Milling MAC-224
  Applied Engineering Technologies Credit Hours: 2

  This course covers advanced methods in setup and operation of CNC machining centers. Emphasis is placed on programming and production of complex…

  This course covers advanced methods in setup and operation of CNC machining centers. Emphasis is placed on programming and production of complex parts. Upon completion, students should be able to demonstrate skills in programming, operations, and setup of CNC machining centers.

  View Details
• Advanced CNC Turning MAC-222
  Applied Engineering Technologies Credit Hours: 2

  This course covers advanced methods in setup and operation of CNC turning centers. Emphasis is placed on programming and production of complex parts.…

  This course covers advanced methods in setup and operation of CNC turning centers. Emphasis is placed on programming and production of complex parts. Upon completion, students should be able to demonstrate skills in programming, operations, and setup of CNC turning centers.

  View Details
• Advanced Engine Performance AUT-281
  Applied Engineering Technologies Credit Hours: 3

  This course utilizes service information and specialized test equipment to diagnose and repair power train control systems. Topics include computerized…

  This course utilizes service information and specialized test equipment to diagnose and repair power train control systems. Topics include computerized ignition, fuel and emission systems, related diagnostic tools and equipment, data communication networks, and service information. Upon completion, students should be able to perform diagnosis and repair.

  View Details
• Advanced JAVA Programming CSC-251
  Applied Engineering Technologies Credit Hours: 3

  This course is a continuation of CSC 151 using the JAVA programming language with object-oriented programming principles. Emphasis is placed on event-driven…

  This course is a continuation of CSC 151 using the JAVA programming language with object-oriented programming principles. Emphasis is placed on event-driven programming methods, including creating and manipulating objects, classes, and using object-oriented tools such as the class debugger. Upon completion, students should be able to design, code, test, debug, and implement objects using the appropriate environment.

  View Details
• Advanced Machining Calculations MAC-152
  Applied Engineering Technologies Credit Hours: 2

  This course combines mathematical functions with practical machine shop applications and problems. Emphasis is placed on gear ratios, lead screws,…

  This course combines mathematical functions with practical machine shop applications and problems. Emphasis is placed on gear ratios, lead screws, indexing problems, and their applications in the machine shop. Upon completion, students should be able to calculate solutions to machining problems.

  View Details
• Advanced Multi-Axis MacHining MAC-234
  Applied Engineering Technologies Credit Hours: 3

  This course includes multi-axis machining using machining centers with multi-axis capabilities. Emphasis is placed on generation of machining center…

  This course includes multi-axis machining using machining centers with multi-axis capabilities. Emphasis is placed on generation of machining center input with a CAM system and setup of pallet changer and rotary system for multi-axis machining fixtures. Upon completion, students should be able to convert CAD to output for multi-axis machining centers, including tooling, setup, and debugging processes.

  View Details
• Appl Software for Tech EGR-125
  Applied Engineering Technologies Credit Hours: 2

  This course introduces personal computer software and teaches students how to customize the software for technical applications. Emphasis is placed…

  This course introduces personal computer software and teaches students how to customize the software for technical applications. Emphasis is placed on the use of common office applications software programs such as spreadsheets, word processing, graphics, and internet access. Upon completion, students should be able to demonstrate competency in using applications software to solve technical problems and communicate the results in text and graphical formats.

  View Details
• Auto Shop Management AUT-212
  Applied Engineering Technologies Credit Hours: 3

  This course covers the principles of management essential to decision-making, communication, authority, and leadership. Topics include shop supervision,…

  This course covers the principles of management essential to decision-making, communication, authority, and leadership. Topics include shop supervision, shop organization, customer relations, cost effectiveness and work place ethics. Upon completion, students should be able to describe basic automotive shop operation from a management standpoint.

  View Details
• Automated Manufacturing ATR-281
  Applied Engineering Technologies Credit Hours: 4

  This course introduces the concepts and principles of automation in the manufacturing environment. Emphasis is placed on the devices used in hard…

  This course introduces the concepts and principles of automation in the manufacturing environment. Emphasis is placed on the devices used in hard and flexible automated systems, including the study of inputs, outputs, and control system integration. Upon completion, students should be able to plan, design, and implement automation to support manufacturing processes.

  View Details
• Automated Welding/Cutting WLD-265
  Applied Engineering Technologies Credit Hours: 4

  This course introduces automated welding equipment and processes. Topics include setup, programming, and operation of automated welding and cutting…

  This course introduces automated welding equipment and processes. Topics include setup, programming, and operation of automated welding and cutting equipment. Upon completion, students should be able to set up, program, and operate automated welding and cutting equipment.

  View Details
• Automatic Transmissions/Transaxles AUT-221
  Applied Engineering Technologies Credit Hours: 3

  This course covers operation, diagnosis, service, and repair of automatic transmissions/transaxles. Topics include hydraulic, pneumatic, mechanical,…

  This course covers operation, diagnosis, service, and repair of automatic transmissions/transaxles. Topics include hydraulic, pneumatic, mechanical, and electrical/electronic operation of automatic drive trains and the use of appropriate service tools and equipment. Upon completion, students should be able to explain operational theory, diagnose and repair automatic drive trains.

  View Details
• Automotive Servicing I AUT-113
  Applied Engineering Technologies Credit Hours: 2

  This course is a lab used as an alternative to co-op placement. Emphasis is placed on shop operations, troubleshooting, testing, adjusting, repairing,…

  This course is a lab used as an alternative to co-op placement. Emphasis is placed on shop operations, troubleshooting, testing, adjusting, repairing, and replacing components using appropriate test equipment and service information. Upon completion, students should be able to perform a variety of automotive repairs using proper service procedures and to operate appropriate equipment.

  View Details
• Basic Auto Electricity AUT-161
  Applied Engineering Technologies Credit Hours: 3

  This course covers basic electrical theory, wiring diagrams, test equipment, and diagnosis, repair, and replacement of batteries, starters, and alternators.…

  This course covers basic electrical theory, wiring diagrams, test equipment, and diagnosis, repair, and replacement of batteries, starters, and alternators. Topics include Ohm’s Law, circuit construction, wiring diagrams, circuit testing, and basic troubleshooting. Upon completion, students should be able to properly use wiring diagrams, diagnose, test, and repair basic wiring, battery, starting, charging, and electrical concerns.

  View Details
• Basic CAD DFT-119
  Applied Engineering Technologies Credit Hours: 2

  This course introduces computer-aided drafting software for specific technologies to non-drafting majors. Emphasis is placed on understanding the…

  This course introduces computer-aided drafting software for specific technologies to non-drafting majors. Emphasis is placed on understanding the software command structure and drafting standards for specific technical fields. Upon completion, students should be able to create and plot basic drawings.

  View Details
• Basic Transport Electricity Lab TRN 120A
  Applied Engineering Technologies Credit Hours: 1

  This course provides a lab that allows students to enhance their understanding of electrical components and circuits used in the transportation industry.…

  This course provides a lab that allows students to enhance their understanding of electrical components and circuits used in the transportation industry. Topics include inspection, diagnosis, and repair of electrical components and circuits using appropriate service information for specific transportation systems. Upon completion, students should be able to diagnose and service electrical components and circuits used in transportation systems.

  View Details
• Basic Welding Processes WLD-112
  Applied Engineering Technologies Credit Hours: 2

  This course introduces basic welding and cutting. Emphasis is placed on beads applied with gases, mild steel fillers, and electrodes and the capillary…

  This course introduces basic welding and cutting. Emphasis is placed on beads applied with gases, mild steel fillers, and electrodes and the capillary action of solder. Upon completion, students should be able to set up welding and oxy-fuel equipment and perform welding, brazing, and soldering processes.

  View Details
• Brake Systems AUT-151
  Applied Engineering Technologies Credit Hours: 3

  This course covers principles of operation and types, diagnosis, service, and repair of brake systems. Topics include drum and disc brakes involving…

  This course covers principles of operation and types, diagnosis, service, and repair of brake systems. Topics include drum and disc brakes involving hydraulic, vacuum boost, hydra-boost, electrically powered boost, and anti-lock and parking brake systems. Upon completion, students should be able to diagnose, service, and repair various automotive braking systems.

  View Details
• Brakes Systems Lab AUT-151A
  Applied Engineering Technologies Credit Hours: 1

  This course is an optional lab to be used as an alternative to co-op placement in meeting the NATEF standards for total hours. Topics include drum…

  This course is an optional lab to be used as an alternative to co-op placement in meeting the NATEF standards for total hours. Topics include drum and disc brakes involving hydraulic, vacuum-boost, hydra-boost, electrically powered boost, and anti-lock, parking brake systems and emerging brake systems technologies. Upon completion, students should be able to diagnose, service, and repair various automotive braking systems.

  View Details
• CAD I DFT-151
  Applied Engineering Technologies Credit Hours: 3

  This course introduces CAD software as a drawing tool. Topics include drawing, editing, file management, and plotting. Upon completion, students…

  This course introduces CAD software as a drawing tool. Topics include drawing, editing, file management, and plotting. Upon completion, students should be able to produce and plot a CAD drawing.

  View Details
• Certification Practices WLD-261
  Applied Engineering Technologies Credit Hours: 2

  This course covers certification requirements for industrial welding processes. Topics include techniques and certification requirements for prequalified…

  This course covers certification requirements for industrial welding processes. Topics include techniques and certification requirements for prequalified joint geometry. Upon completion, students should be able to perform welds on carbon steel plate and/or pipe according to applicable codes.

  View Details
• CNC EDM Machining MAC-226
  Applied Engineering Technologies Credit Hours: 2

  This course introduces the programming, setup, and operation of CNC electrical discharge machines. Topics include programming formats, control functions,…

  This course introduces the programming, setup, and operation of CNC electrical discharge machines. Topics include programming formats, control functions, program editing, production of parts, and inspection. Upon completion, students should be able to manufacture simple parts using CNC electrical discharge machines.

  View Details
• CNC Milling MAC-124
  Applied Engineering Technologies Credit Hours: 2

  This course introduces the manual programming, setup, and operation of CNC machining centers. Topics include programming formats, control functions,…

  This course introduces the manual programming, setup, and operation of CNC machining centers. Topics include programming formats, control functions, program editing, part production, and inspection. Upon completion, students should be able to manufacture simple parts using CNC machining centers.

  View Details
• CNC Turning MAC-122
  Applied Engineering Technologies Credit Hours: 2

  This course introduces the programming, setup, and operation of CNC turning centers. Topics include programming formats, control functions, program…

  This course introduces the programming, setup, and operation of CNC turning centers. Topics include programming formats, control functions, program editing, part production, and inspection. Upon completion, students should be able to manufacture simple parts using CNC turning centers.

  View Details
• Computer Architecture CET 130
  Applied Engineering Technologies Credit Hours: 2

  This course introduces the concepts, usage, internals and applications of operating systems used in engineering technology. Topics include resource…

  This course introduces the concepts, usage, internals and applications of operating systems used in engineering technology. Topics include resource management, shells, schedulers, file systems, networking, software considerations and other related topics. Upon completion, students should be able to choose and evaluate an operating system for engineering applications.

  View Details